Repair cost · Termites & Pests
Termite Damage Repair Cost
In short: Repairing termite damage costs $300 to $2,000 for minor damage, $2,000 to $5,000 for moderate damage and $5,000 to $15,000 or more for major structural damage, according to HomeGuide. Angi puts typical repairs at $600 to $3,000. Beams cost $2,000 to $5,000 each to repair, and sagging floors $2,000 to $7,000.
Angi puts typical termite damage repair at $600 to $3,000, and up to $6,000 for severe damage. HomeGuide groups repairs by severity.
Cost by severity
| Damage | Cost (HomeGuide) |
|---|---|
| Minor | $300 – $2,000 |
| Moderate | $2,000 – $5,000 |
| Major | $5,000 – $15,000+ |
Cost by area
| Repair | HomeGuide | Angi |
|---|---|---|
| Patching drywall holes | $200 – $400 | $300 – $900 (drywall) |
| Wood boards and joints | – | $250 – $1,000 |
| Subfloor | $500 – $2,000+ | – |
| Replacing a wall | $500 – $2,500 | – |
| Walls, flooring and framing | – | $1,000 – $3,000 |
| Moisture and water damage | – | $1,350 – $6,200 |
| Sagging floor | $2,000 – $7,000 | – |
| Beams | $2,000 – $5,000 per beam | – |
| Wood framing | $11 – $30 per linear foot | – |
Treatment
HomeGuide lists chemical or bait treatment at $225 to $2,500 and tenting at $2,000 to $8,000, and inspections at $0 to $250. See termite treatment cost.
Inspection
For structural inspections, see foundation inspection cost.
More repair prices (HomeGuide)
| Repair | Cost |
|---|---|
| Siding replacement | $4 – $13 per sq ft |
| Hardwood floor refinishing | $2 – $8 per sq ft |
| Wall repainting | $2 – $5 per sq ft |
| Electrical repair | $150 – $600 |
| Structural engineer inspection | $350 – $900 |
Most contractors have minimum fees of $100 to $200 or more.
Treatment costs
HomeGuide lists soil treatment and bait stations at $225 to $2,500 and whole-house tenting at $2,000 to $8,000. A termite inspection is often free and otherwise up to $250.
When an engineer is needed
If beams, joists or a sagging floor are involved, HomeGuide lists a structural engineer inspection at $350 to $900, sagging floor repair at $2,000 to $7,000 and beam replacement at $2,000 to $5,000 per beam.
Angi's repair prices
| Repair | Cost (Angi) |
|---|---|
| A few wood boards or joints | $250 – $1,000 |
| Drywall | $300 – $900 |
| Walls, flooring or framing | $1,000 – $3,000 |
| Moisture and water damage | $1,350 – $6,200 |
Angi's national average for termite treatment is $621, with most homeowners paying $263 to $1,033; it lists damage repair on top of treatment at $250 to $6,000, and severe structural repair at up to $6,000.
What termite damage looks like
- Wood that sounds hollow when tapped.
- Blistering or bubbling paint.
- Mud tubes on foundation walls.
- Sagging floors or ceilings.
- Small piles of wings near windows.
Treat first, then repair
Repairs should come after the termites are treated. Otherwise new wood can be attacked too. Ask for proof of treatment before starting repairs.
Types of repair
- Minor repairs: replacing trim, siding or small sections of wood.
- Structural repairs: sistering joists, replacing studs or sill plates.
- Major repairs: replacing large sections of framing or flooring.
What affects the price
- How much damage there is and where.
- Whether structural parts are affected.
- Access behind walls, floors and ceilings.
- Engineer review for structural damage.
- Finishing work after repairs.
Questions to ask
- Has the termite treatment been completed?
- Is the damage structural?
- Will you need an engineer's review?
In Texas
Subterranean termites are common across Texas, and Formosan termites are found in parts of the state, especially near the Gulf Coast. Regular inspections help catch damage early.
How damage is assessed
Termite damage is often hidden inside walls, floors and framing, so the visible damage may be only part of the problem. A contractor or inspector usually:
- Probes wood with a screwdriver or awl to find soft, hollow areas.
- Taps on wood to listen for hollow sounds.
- Uses moisture meters, since termites are drawn to damp wood.
- Removes trim, drywall or flooring in suspected areas to see the framing.
- Checks the crawl space, attic and foundation.
For structural damage to joists, beams, sill plates or load-bearing studs, a structural engineer may need to evaluate the repair.
Repair methods
Reinforcing (sistering). A new board is attached alongside a damaged joist or stud to restore strength without removing the original.
Replacing. Badly damaged boards are cut out and replaced. Load-bearing members may need temporary support during replacement.
Wood hardeners and fillers. For minor, non-structural damage, such as trim or window sills, the damaged wood is treated with a consolidant and filled.
Cosmetic repairs. Drywall, flooring, paint and trim that termites damaged are repaired or replaced.
Treat before you repair
Repairs should happen only after the termites have been treated and the infestation is confirmed under control. Repairing first can trap active termites in the new wood. Many contractors ask for proof of treatment before starting.
Insurance usually does not cover it
Most homeowners insurance policies exclude termite damage, treating it as a maintenance issue that could have been prevented. That makes prevention important: regular termite inspections, a treatment warranty from a pest control company, and keeping wood from contacting soil.
Preventing future damage
- Fix leaks and moisture problems that attract termites.
- Keep mulch, firewood and wood debris away from the foundation.
- Maintain a gap between soil and wood siding.
- Keep gutters clean and downspouts directing water away.
- Schedule regular termite inspections, especially in regions where termites are common.
Hiring the right contractor
Termite damage repairs can be simple carpentry or structural work. For trim, siding and window sills, a carpenter or handyman can usually do the job. For damage to joists, beams, sill plates or load-bearing walls, hire a licensed general contractor and, when needed, a structural engineer. Ask whether the work requires a permit, and get a written scope that lists every board to be replaced or reinforced.
Selling a home with termite history
Many buyers and lenders require a wood-destroying insect inspection. If your home has had termites, keep records of the treatment, warranty and repairs. Showing that termites were treated and damage was repaired properly makes the sale easier.
Small repairs can be done in a day. Structural repairs can take several days or weeks, depending on the extent. Ask for a schedule before work starts so you can plan around any rooms that will be closed off.
Regular inspections
A yearly termite inspection by a licensed pest control company catches activity before it causes major damage. Many treatment warranties require it. Inspectors look in crawl spaces, attics, garages and along the foundation, and note conditions that attract termites, such as wood touching soil, leaking pipes or mulch piled against siding.
Sources
Pest control companies in Texas
Our Texas business directory lists 508 pest control companies across 6 major cities. The ratings below are the average Google rating of the listed businesses in each city, and the review counts are the total number of Google reviews they have received.
| City | Businesses listed | Avg. Google rating | Total reviews |
|---|---|---|---|
| Houston | 169 | 4.7 | 119,360 |
| Dallas | 79 | 4.8 | 12,923 |
| San Antonio | 100 | 4.7 | 51,337 |
| Austin | 61 | 4.8 | 47,001 |
| Fort Worth | 66 | 4.8 | 29,948 |
| El Paso | 33 | 4.8 | 9,465 |
Source: twupro Texas business directory, built from public Google Maps listings.
Get local prices
Compare local restoration and pest control companies with reviews and phone numbers in your area.